Factory source Expanding Gate Valve - stainless steel manual operation wall type penstock gate – Kingnor

Short Description:

Brief introduction The penstock gate is widely used in the pipe mouth where the medium is water (raw water, clean water and sewage), the medium temperature is ≤ 80 ℃, and the maximum water head is ≤ 10m, the intersection kiln shaft, sand settling tank, sedimentation tank, diversion channel, pump station intake and clean water well, etc., so as to realize the flow and liquid level control. It is one of the important equipment for water supply and drainage and sewage treatment. Wall type pe...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Astm Wpb A234 Butt Welding Pipe Fitting , Ductile Cast Iron Pipe Fittings , Knife Stem Gate Valve , Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !

Factory source Expanding Gate Valve - stainless steel manual operation wall type penstock gate – Kingnor Detail:

Brief introduction

The penstock gate is widely used in the pipe mouth where the medium is water (raw water, clean water and sewage), the medium temperature is ≤ 80 ℃, and the maximum water head is ≤ 10m, the intersection kiln shaft, sand settling tank, sedimentation tank, diversion channel, pump station intake and clean water well, etc., so as to realize the flow and liquid level control. It is one of the important equipment for water supply and drainage and sewage treatment.

Wall type penstocks is used in inlet and outlet of wall for open or close, and use anchor bolts to fix the penstock to the hole surface.

Main parameters

1.Diameter: 200×200-4000x4000mm
2.Size range：200×200-4000x4000mm

3.Pressure: 1M-10M water head
4.Medium: water,sewage
5.Tem: ≤80℃

6. End connection: A:Anchor bolt installation
B:Cement pouring

Material of main parts
Body material			Stainless steel
Disc material			Stainless steel
Stem material			SS420
Sealing material			EPDM/ NBR

Product detail pictures:

Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Factory source Expanding Gate Valve - stainless steel manual operation wall type penstock gate – Kingnor, The product will supply to all over the world, such as: Hyderabad , kazakhstan , Dubai , We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!

Brass Drain Valve

Double Shaft Butterfly Valve

Ductile Iron Pipe Fittings

Nut And Bolt Fastener

Wafer Type Cast Iron Butterfly Valve

Y Strainer

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!